AL 3 Flutes Radius End mills
Al series Solid Carbide End mills for Aluminium, 3 Flutes, Radius, Metric
Recommend cut material: Aluminium, Copper, Cast Aluminium, Aluminium alloy, PVC,Brass and other Non-ferrous Metals.
Coating: Uncoated, good surface finishing, smooth scarp remove effect
WC: 89.2-90.2
Co: 10/12
HRC: 91-92
Density (g/cm3): 14.2-14.5
RTS (N/mm2) : ≥ 3500
Grain size (um): 0.6
Helix angle: 45°
Front angle: 17°
Clear edge: Straight
Speeds and Feeds for Side Milling for Slot Milling reduce values by 40%-70%, use air coolant or high mist retardant liquid cooling
| Aluminium Alloy | Silicon Aluminium Alloy Si≤10% |
| RPM 16000 Feed 1750 mm/min | RPM 13000 Feed 1300 mm/min |
TYPE D R d H M d1 L Z AL-3R-D12.0R1.0 12 1 12 12 37 11 83 3 AL-3R-D12.0R2.0 12 2 12 12 37 11 83 3 AL-3R-D12.0R3.0 12 3 12 12 37 11 83 3 AL-3R-D16.0R1.0 16 1 16 16 43 15 92 3 AL-3R-D16.0R2.0 16 2 16 16 43 15 92 3 AL-3R-D16.0R3.0 16 3 16 16 43 15 92 3 AL-3R-D16.0R4.0 16 4 16 16 43 15 92 3 AL-3R-D20.0R1.0 20 1 20 20 53 19 104 3 AL-3R-D20.0R2.0 20 2 20 20 53 19 104 3 AL-3R-D20.0R3.0 20 3 20 20 53 19 104 3 AL-3R-D20.0R4.0 20 4 20 20 53 19 104 3 AL-3R-D20.0R5.0 20 5 20 20 53 19 104 3 AL-3R-D20.0R6.0 20 6 20 20 53 19 104 3
Specification
Select